Coatings

Displaying 1 - 10 of 115

Rapid curing epoxy offers high bond strength

Master Bond EP41S-F is a two part epoxy for bonding, sealing, coating and encapsulation applications. It combines fast ambient temperature cure speed with chemical resistance and superior electrical insulation properties. This versatile system is easy to handle and has a forgiving 100 to 25 mix ratio by weight. After mixing, EP41S-F polymerizes quickly and can usually be removed from a fixture within 20-30 minutes. Full cures are achieved in 24 hours at 75°F or in 45-60 minutes at 200°F.
28th June 2017

Screen coating takes its inspiration from moth eyes

Screen coating takes its inspiration from moth eyes
Screens on even the newest phones and tablets can be hard to read outside in bright sunlight. Inspired by the nanostructures found on moth eyes, researchers have developed a new antireflection film that could keep people from having to run to the shade to look at their mobile devices. The antireflection film exhibits a surface reflection of just 23%, much lower than the iPhone's surface reflection of 4.4%, for example.
26th June 2017

UV/Visible light cure maskant introduced for electronics

UV/Visible light cure maskant introduced for electronics
Intertronics have introduced the new DYMAX Speedmask 9-7001, which offers significant time saving in assembly of electronics connectors and other board level components to PCBs. Once cured in seconds with UV/visible light, the (pink) maskant enables easy visual checks, while its low shrinkage rate ensures accurate reliable coverage.
19th June 2017


Fast and easy floor marking

Fast and easy floor marking
Designed to help create precise painted lines, Brady’s new PaintStripe Floor Marking Stencils help quickly organise workplaces and increase their efficiency. The PaintStripe can increase workplace efficiency Clear visuals, like safety signs and floor marking, and can communicate important information exactly where the information is needed. They help create an efficient, lean workplace by supporting employees to quickly and easily recognise safe walking areas, forklift lanes, storage locations and specific production areas.
16th June 2017

Carbodeon demonstrates NanoDiamond nickel coatings

Carbodeon demonstrates NanoDiamond nickel coatings
Carbodeon of Finland has worked with metal finishing specialist CCT Plating of Germany, to develop a new NanoDiamond enhanced electroless nickel plating with significantly improved performance in sliding applications. Electroless nickel coatings offer many advantages over other coating types, such as excellent corrosion and abrasion resistance, creating an even coating thickness over complex geometries and at relatively low cost.
7th June 2017

Collaboration brings success to 2K coating dispensing optimisation

Electrolube is selectively partnering with key dispensing equipment manufacturers (including PVA, Nordson Asymtek and others) to ensure that its 2K conformal coatings enable customers to obtain optimum results from its range of two-part coating systems. Electrolube’s systems are specifically designed to combine the protection and properties of a resin with the straightforward application of a conformal coating without the use of harmful solvents.
6th June 2017

High performance silicone conformal coatings

High performance silicone conformal coatings
Techsil’s new silicone conformal coating formulations manufactured by Momentive are said to out-perform other conformal coating materials for corrosion prevention. Momentive’s ECC3011 and ECC3051S silicone conformal coating materials use a formulation that can help prevent the occurrence of corrosion on vital PCB components and surfaces.
31st May 2017

A coat(ing) for all seasons

A coat(ing) for all seasons
In recent years, modern coatings technology has been advancing rapidly; used to prevent oxidation, corrosion and improve wear resistance as well as provide protection from high temperatures, manufacturers are keen to exploit new coatings to improve the durability of their products. However, not all coatings are the same and the quality of the final product relies on high quality equipment and expert application techniques.
18th May 2017

Waterproofing technology company receive £10m funding

Waterproofing technology company receive £10m funding
Pioneers of a liquid repellent technology employed by smartphone manufacturers, P2i, has received a £10m pound funding package from Clydesdale and Yorkshire Bank’s Growth Finance team. With its headquarters in Oxfordshire, British company P2i has already applied its innovative water resistant nano-coating solution to more than 175 million smartphones. Globally, 900,000 smartphones are damaged by liquids every day, at an estimated cost of $96bn to the mobile ecosystem every year, according to analyst firm IDC.
15th May 2017

Water-based rust prevention saves money

Water-based rust prevention saves money
Cortec  has developed a  water-based rust preventative (RP) that reduces applied cost by 40% compared to a bestselling oil-based product. It is said to offer excellent corrosion protection while reducing carbon footprint and cutting common labour or disposal costs associated with traditional RPs.  
10th May 2017


Coatings documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EPE 2017 ECCE Europe
11th September 2017
Poland Warsaw
DSEI 2017
12th September 2017
United Kingdom ExCeL, London
RWM 2017
12th September 2017
United Kingdom NEC, Birmingham
Productronica India 2017
14th September 2017
India Pragati Maidan, New Delhi
Industry of Things World 2017
18th September 2017
Germany Berlin Congress Center