Component Placement

Displaying 11 - 20 of 108

Multitest ships first MT2168 XT pick and place handler

Multitest ships first MT2168 XT pick and place handler
Multitest has shipped the first MT2168 XT tri-temp pick and place handler to a major IDM. It combines the architecture of the MT2168 ambient/hot handler with the level of temperature test performance for which Multitest is well known.
12th July 2016

Intelligent storage system now provides automatic kitting

Intelligent storage system now provides automatic kitting
  Juki has announced an intelligent storage system, ISM UltraFlex 3600, now providing automatic kitting for the next run on placement machines. Providing the ultimate flexibility, the system communicates with the placement system when a reel of parts is low.
30th June 2016

Vacuum handling systems at SEMICON West

Virtual Industries just announced that it will exhibit at SEMICON West (July 12-14) and will demonstrate the TWEEZER-VAC Elite and ADJUST-A-VAC Elite.
27th June 2016


Computrol expands Its SMT capability

Computrol expands Its SMT capability
Computrol has purchased and installed an Assembléon iFlex T2 and two iFlex H1s from Kulicke & Soffa. The iFlex T2 is a multifunctional or line-balancing solution with a large component range while the iFlex H1 end-of-line solution offers odd-form and gripper capabilities.
15th June 2016

Surface mounter achieves 200,000 CPH

Surface mounter achieves 200,000 CPH
Yamaha Motor IM Europe has announced the introduction of the Z:TA-R YSM40R surface mounter, which boasts the fastest production in the world at 200,000 CPH. The Z:TA-R YSM40R is an ultra-high-speed modular mounter that has been developed under the Revolutionary productivity concept.
7th June 2016

Versatile feeder repair set

Versatile feeder repair set
Count On Tools (COT) just introduced the MYDATA Agilis feeder repair set which allows customers to convert any Agilis feeder to any of the four sizes to reduce overall feeder count and maximize production capabilities.
10th May 2016

Space saving pick-and-place machine

The new FOX by Essemtec AG is perfectly suited for use in small production environments and fits through narrow doors. It measures only 88cm x 109cm but can accept PCB’s of up to 406mm x 305mm. Components with sizes from 0201 (imperial) up to 33x80mm can be placed with a speed of up to 4500 cph (IPC9850A). 
19th April 2016

Essemtec to Launch Automatic Placement System at SMT/Hybrid/Packaging

Essemtec is set to launch its Fox SMD Automatic Placement System at SMT/Hybrid/Packaging in Nuremberg. With this launch, Essemtec claims a new benchmark for compact, highly flexible assembly machines.
18th April 2016

Slimline Label Feeder saves space

Elite Feeder Solutions, a provider of specialist feeders for the SMT and robotics industries, has introduced a 30 mm Slimline Label Feeder that provides 50 percent space saving in a pick-and place-system. According to Elite, label feeders typically have a width of around 60mm. However, most of the labels used in electronics production are very small: maximum 9x9 mm. The space in the pick-and-place system is valuable; therefore says Elite, why occupy more of it than absolutely necessary?
18th April 2016

Valtronic buys Juki Equipment at IPC APEX EXPO

Valtronic buys Juki Equipment at IPC APEX EXPO
Valtronic used 2016 IPC APEX EXPO to purchase Juki equipment for its Solon, Ohio-based location. Valtronic purchased the TR6DNR-D Matrix Tray Changer along with additional tape feeders. The company will use the tray changer to duplicate its second JUKI SMT Line, enabling Valtronic to run various products and allowing various feeders and overall efficiency to the production line.
12th April 2016


Component Placement documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

LASER World of PHOTONICS 2017
26th June 2017
Germany Messe Munchen
EPE 2017 ECCE Europe
11th September 2017
Poland Warsaw
DSEI 2017
12th September 2017
United Kingdom ExCeL, London
RWM 2017
12th September 2017
United Kingdom NEC, Birmingham
Productronica India 2017
14th September 2017
India Pragati Maidan, New Delhi