Dispensing

Displaying 1 - 10 of 68

Precision tapered dispense tip

Precision tapered dispense tip
Fisnar Europe has announced two newly developed Precision Tapered Dispense Tips said to be ideal for use in medical devices and industrial electronics manufacture. The first of these new dispense tips is a standard 27 gauge, while the second is a 30 gauge tip with an internal diameter of just 0.15mm. 
28th March 2017

Positive displacement PC pump

Positive displacement PC pump
The TS8100 Series Positive Displacement PC Pump from Ellsworth Adhesives Europe has been designed with the ability to dispense a diverse range of fluids including low viscosity coatings to high viscosity greases. It is based on progressive cavity (PC) technology, with a special stator and rotor design to create an accurate and consistent dispensing output. 
7th March 2017

Versatile dispensing brush tip range

Versatile dispensing brush tip range
Fisnar Europe just announced the launch of eight dispensing brush tips  available in different brush and flow sizes allowing users to easily control the coverage of fluid to substrate, as well as the speed of fluid flow through the tip. Users will be pleased to learn that these tips are said to be competitively priced against existing brush tips on the market. 
23rd February 2017


ATS's Feeder Finger to be incorporated in Juki models

Juki Automation Systems has announced an agreement, under which Juki will incorporate ATS’s Feeder Finger into several models of Juki Feeders.
17th February 2017

Precision facilitates miniaturisation

The preeflow eco-DUO330 from Intertronics helps to meet the need for smaller, more precise and ever more repeatable metering, mixing and dispensing units for two-part materials. It also helps to improve micro-dosing for two component systems and can provide dosages as small as 0.2 to 32ml/min with complete repeatability. This is expected to be of value in the fields of medical device manufacturing, optics, photonics, electronics assembly, biochemistry and semi-conductors, where the ability to meter and mix small volumes will be key.
20th December 2016

Greater precision for electronics manufacturers

The Graco UniXact is a fully automated precision dispense solution from Graco Advanced Fluid Dispense (AFD) that provides a single source for motion, fluid dispense and process monitoring for thermal interface management (TIM) applications.
29th September 2016

Essemtec’s Jet Dispenser at IMAPS 2016

Essemtec’s Jet Dispenser at IMAPS 2016
Essemtec  plans to exhibit at IMAPS Pasadena and will demonstrate its compact Spider jet dispenser which can utilize two dispensing valves rated at up to 150,000 dots per hour. It dispenses 3D patterns and is easily adapted to an application.
29th September 2016

Hot melt jet valves at NEPCON South China

Hot melt jet valves at NEPCON South China
Techcon Systems will exhibit at NEPCON South China and will showcase the new TS9300HM Hot Melt Jet Valve as well as Techcon Systems’ lineup of industry-leading valves. The TS5624 Disposable Path Material Diaphragm Valve dispenses low to medium viscosity fluids over a wide range of shot and bead sizes, down to a fraction of a micro litre.
25th August 2016

Nordson ASYMTEK to present at CMMF China

Nordson ASYMTEK to present at CMMF China
ASYMTEK will present the paper Advanced Dispense Solutions for Hand-held Devices, at China Mobile Manufacture Forum (CMMF) - August 25. In addition, they will be exhibiting the latest in jet dispensing and conformal coating technologies at NEPCON South China (August 30-Sept 1).
17th August 2016

Saline Lectronics installs Stinger dispense module

Saline Lectronics installs Stinger dispense module
Saline Lectronics has recently installed the Stinger on its DEK Horizon 03iX printer used on a high-volume SMT Line. The Stinger is a low-volume dispense module that can be attached to the camera carriage of a standard DEK printer.
10th August 2016


Dispensing documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EPE 2017 ECCE Europe
11th September 2017
Poland Warsaw
DSEI 2017
12th September 2017
United Kingdom ExCeL, London
RWM 2017
12th September 2017
United Kingdom NEC, Birmingham
Productronica India 2017
14th September 2017
India Pragati Maidan, New Delhi
Industry of Things World 2017
18th September 2017
Germany Berlin Congress Center