3-DIY: printing your own bioprinter

17th April 2018
Posted By : Enaie Azambuja
3-DIY: printing your own bioprinter

 

Researchers at Carnegie Mellon University have developed a low-cost 3D bioprinter by modifying a standard desktop 3D printer, and they have released the breakthrough designs as open source so that anyone can build their own system.

The researchers—Materials Science and Engineering (MSE) and Biomedical Engineering (BME) Associate Professor Adam Feinberg, BME postdoctoral fellow TJ Hinton, and Kira Pusch, a recent graduate of the MSE undergraduate program—recently published a paper in the journal HardwareX that contains complete instructions for printing and installing the syringe-based, large volume extruder (LVE) to modify any typical, commercial plastic printer.

“What we’ve created,” says Pusch, “is a large volume syringe pump extruder that works with almost any open source fused deposition modeling (FDM) printer. This means that it’s an inexpensive and relatively easy adaptation for people who use 3D printers.”

As the researchers explain in their paper, “Large volume syringe pump extruder for desktop 3D printers,” most commercial 3D bioprinters currently on the market range in cost from $10,000 to more than $200,000 and are typically proprietary machines, closed source, and difficult to modify.

“Essentially, we’ve developed a bioprinter that you can build for under $500, that I would argue is at least on par with many that cost far more money,” says Feinberg, who is also a member of the Bioengineered Organs Initiative at Carnegie Mellon.

“Most 3D bioprinters start between $10K and $20K. This is significantly cheaper, and we provide very detailed instructional videos. It’s really about democratising technology and trying to get it into more people’s hands.”

And not only does the LVE cut down on cost, it also allows users to print artificial human tissue on a larger scale and at higher resolution, opening doors for researchers, makers, and professionals to experiment with 3D printing biomaterials and fluids.

“Usually there’s a trade-off,” explains Feinberg, “because when the systems dispense smaller amounts of material, we have more control and can print small items with high resolution, but as systems get bigger, various challenges arise. The LVE 3D bioprinter allows us to print much larger tissue scaffolds, at the scale of an entire human heart, with high quality.”

“Bioprinting has historically been limited in volume,” adds Pusch, “so essentially the goal is to just scale up the process without sacrificing detail and quality of the print.”

Pusch, the first author on the paper, was a research assistant in Feinberg’s lab for three years during her undergraduate career. During that time, she received an International Summer Undergraduate Research Fellowship (iSURF) to work in the Netherlands, and also interned with General Electric’s Center for Additive Technology Advancement.

Following her graduation from Carnegie Mellon in December of 2017, she began a spring internship at Formlabs in Boston and has since accepted a second internship position for the summer at Blue Origin in Seattle.

Pusch has also co-authored a second paper in ACS Biomaterials Science & Engineering with Hinton, “3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding.”

As a research assistant in Feinberg’s lab, Pusch was able to experience real-world application of her research early on in her academic career. When asked about her experience in Feinberg’s lab, Pusch emphasises how grateful she is to have had the opportunity to work with such supportive and brilliant mentors.

In their paper, the researchers demonstrated the system using alginate, a common biomaterial for 3D printing, and using the lab’s signature Freeform Reversible Embedding of Suspended Hydrogels (FRESH) technique.

Feinberg’s lab aims to produce open source biomedical research that other researchers can expand upon. By making their research widely accessible, Feinberg’s lab hopes to seed innovation widely, to encourage the rapid development of biomedical technologies to save lives.

“We envision this as being the first of many technologies that we push into the open source environment to drive the field forward,” says Feinberg. “It’s something we really believe in.”


Discover more here.

Image credit: Carnegie Mellon University.


You must be logged in to comment

Write a comment

No comments




More from Carnegie Mellon University (CMU)

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Startups Magazine Launch Party: Financing a Startup
24th July 2018
United Kingdom WeWork Waterhouse Square, London
European Microwave Week 2018
23rd September 2018
Spain Ifema Feria De Madrid
IoT Solutions World Congress 2018
16th October 2018
Spain Barcelona
Engineering Design Show 2018
17th October 2018
United Kingdom Ricoh Arena, Coventry
Maintec 2018
6th November 2018
United Kingdom NEC, Birmingham