3D printers could pose an air quality risk

22nd November 2018
Posted By : Joe Bush
3D printers could pose an air quality risk

Consumer oriented 3D printers could show up on many Christmas wish lists this year, but purchasers should be aware of recent research conducted at Georgia Institute of Technology that highlights how the popular low cost devices could pose a health risk by harming indoor air quality.

A recently completed multi-year research project, sponsored by UL Chemical Safety, was aimed at characterising particle emissions by the printers in a controlled environment.

The researchers found that the printers generate a range of different-sized particles, including ultra-fine particles (UFPs), which have the potential to be inhaled deep into the human pulmonary system and impact respiratory health.

“These printers tend to produce particles that are very small, especially at the beginning of the print process, and in an environment without good ventilation, they could significantly reduce indoor air quality,” said Rodney Weber, a professor in Georgia Tech’s School of Earth & Atmospheric Sciences who led the research.

Many of the findings were published in 2018 and 2017 in Aerosol Science and Technology and other studies are forthcoming.

The research endeavour revealed that more than 200 different volatile organic compounds (VOCs), many of which are known or suspected irritants and carcinogens, are released while 3D printers are in operation.

Several factors, including nozzle temperature, filament type, filament and printer brand, and filament colour, affected emissions. Meanwhile extrusion temperature, filament material and filament brand were found to have the greatest impact on emission levels.

“We found that one of the overriding principles is the temperature of the filament,” Weber said. “If you use a filament that requires a higher temperature to melt, such as ABS plastic, you produce more particles than PLA plastic filaments, which require lower temperatures.”

As a result of the research, UL is advocating for a complete risk assessment of all 3D printers, taking into account dose and personal sensitivity considerations as well as the publication of more marketplace information about each printer to help consumers choose safer options.

“Following our series of studies – the most extensive to date on 3D printer emissions – we are recommending additional investments in scientific research, product advancement to minimise emissions, and increased user awareness so that safety measures can be taken,” said Marilyn Black, Vice President and Senior Technical Advisor at UL.

In the meantime, some measures can be taken by operators of 3D printers to lessen their impact on air quality.

  • Operating 3D printers only in well-ventilated areas
  • Setting the nozzle temperature at the lower end of the suggested temperature range for filament materials
  • Standing away from operating machines
  • Using machines and filaments that have been tested and verified to have low emissions.

Based on the scientific research conducted with Georgia Tech and further collaboration with other stakeholders, UL developed an ANSI consensus standard for testing and evaluating 3D printer emissions to set emissions targets for 3D printer manufacturers. UL/ANSI 2904 is in the final stages of completion and should be available in December 2018.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Hotspots Specials 2019
24th October 2019
Germany Böblingen, Germany
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona
Maintec 2019
30th October 2019
United Kingdom NEC, Birmingham
NOAH Conference 2019
30th October 2019
United Kingdom Old Billingsgate, London
productronica 2019
12th November 2019
Germany Messe München