Dual curing epoxy meets biocompatibility requirements

24th April 2019
Posted By : Alex Lynn
Dual curing epoxy meets biocompatibility requirements

A single component, nanosilica filled compound featuring a UV and heat curing mechanism has been released by Master Bond, with the UV22DC80-1Med. Not only does it pass USP Class VI Tests for biocompatibility, but it also meets ISO 10993-5 for cytotoxicity, making it ideal for many applications in the medical device industry. 

As a nanosilica filled system, UV22DC80-1Med offers low shrinkage upon cure, abrasion resistance and dimensional stability with a low coefficient of thermal expansion 30 to 35 x 10-6 inch/inch/°C. It is a reliable electrical insulator with volume resistivity of more than 1014 ohm-cm and dielectric constant of 3.85 at 60Hz. UV22DC80-1Med is optically clear with refractive index of 1.52.

The UV curing process for UV22DC80-1Med takes only ten to 30 seconds at a 365nm wavelength and ten to 40mW/cm2 of UV output. The heat curing process can be initiated at 80°C, making it highly desirable in applications involving heat sensitive components. Optional post curing at 125 to 150°C for 15 to 30 minutes will increase the glass transition temperature to over 125°C.This system is not oxygen inhibited. 

UV22DC80-1Med has a low viscosity of 500 to 3,500 cps at 75°F (~ 23°C). It bonds well to a variety of substrates including metals, glass, ceramics and most plastics. This compound has very good resistance to various sterilisation methods including autoclaving and many chemical sterilants. It is available for use in 30cc EFD syringes, half pint, one pint, and quart containers.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi