Engineered Material Systems Low-Temperature Cure/Snap Cure Conductive Adhesive
Engineered Material Systems introduces the CA-180 Low Temperature Cure/Snap Cure Conductive Adhesive designed for die-attach applications in smart cards, circuit assembly, photonics or camera modules.
ECM CA-180 will cure in 30 minutes at 80°C or in seconds at 200°C, and has a moderate glass transition temperature (Tg) and modulus. CA-180 has an optimized rheology for needle dispensing by time-pressure, auger or positive displacement. Unlike most conductive adhesives, CA-180 develops excellent conductivity with short, low-temperature cures. After curing for 30 minutes at 80°C, its electrical conductivity is 0.00006ohm-cm.
CA-180 is the latest addition to Engineered Material Systems’ extensive line of electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonic applications.
Product Spotlight
APV1111GVY
Panasonic
Panasonic PhotoMOS® Photovoltaic MOSFET High-Power Drivers
| SKU: | |
|---|---|
| Stock: | 3490 |
| Cost: | $3.95 |
