Analysis

Vision system improves productivity with default detection

27th January 2014
Staff Reporter
0

Used to inspect protective transparent resin overlays on its smart-card micromodules, Gemalto has reported improved productivity using Keyence's CV-5000 vision system. The system can quickly halt production if a defect is detected.

Producing 12,000 modules per hour, 12 modules are inspected at the same time due to the smart-cards being placed in 12 different positions. Using the CV-5000 vision system the inspection position is only 50 cm away from the resin dispensing station, a large improvement of 3-4 meters in the past. This allows for early detection of defects and quick resolution of the issue, leading to a large reduction in waste. Gemalto's previous warning alarm, to turn off the machine, would go on at over 500 defects.

"We were looking for a stable solution that could quickly perform this fine detection despite the high production rate and have the alarm set to go off below 500 defects. The vision system is connected to the machine's control system and it does its job perfectly. It has enabled us to achieve significant productivity gains. Keyence's cameras are installed on six lines and there are plans to add a seventh one soon. The cameras have been operating 24/7 for three years now and we're completely satisfied with their detection stability," commented Thierry Padovani, Coating and Assembly Engineer at Gemalto. The detection process is made more complicated by the fact that the resin used is transparent. "We quickly solved that problem by adding special lighting to reveal differences in opacity," explains Padovani. "The images captured are processed in black and white with a resolution of 1.2 megapixels. It was very quick to set up and use. Keyence developed a validation module that worked immediately and has been running fine since."

The vision system handles all color, B/W, single-camera and multi-camera applications in record time, which increases detection stability. Keyence claim that the CV-5000 is the most powerful self-contained vision system on the market, highlighting that the system achieves 1 million pixels to be processed in 20.5 ms. This processing power also makes it possible to perform multiple inspections and further enhance the reliability of in-process inspections thanks to its unparalleled repeatability (seven times higher than that of current standards) and many image processing tasks that optimize inspection accuracy.

CV-5000 Series models are controlled by a high-speed color processing engine and a high-speed Reduced Instruction Set Computer CPU. Both are supplemented by two DSPs designed specifically for image processing.

All CV-5000 Series models use these four processors to achieve task specific processing and attain the fastest processing speeds possible - twice that of the leading models available on the market. The system is also equipped with a double-buffer memory that allows it to capture the next image while an image is being processed. This enables an inspection time of about 16 ms (about 3,700 parts per minute) even in non-interlaced reading mode. The CV-5000 Series offers maximum connectivity through discrete I/O, Ethernet, Ethernet I/P, USB and RS232 ports and can easily be integrated with PLCs or PCs.

 

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier