Count On Tools Inc

Address:
2481 Hilton Dr., Suite 3
Gainesville

GA 30501
United States of America

Phone: +1 770-538-0411

Web: www.pbtools.us


Count On Tools Inc articles

Displaying 1 - 20 of 22

Machining centres boost manufacturing facility output

Machining centres boost manufacturing facility output
Four MAZAK machining centres have been installed by Count On Tools (COT), a provider of precision components and SMT spare parts following the recent expansion of its manufacturing facility, The equipment will increase production capabilities and lower product lead times and expands COT’s current capabilities into larger diameter parts, including more complex features that can be manufactured with significant costs savings to the end-user.
3rd August 2017

Special pricing extended on MYDATA feeder repair kits

Count On Tools has extended the special introductory pricing on all MYDATA Feeder Repair Kits. It began in May and will now be effective until December 31, 2016. Each kit includes a precision machined aluminum side cover plate with cover tape plow pre-installed, a new spring and matching screws for reassembly. This is the only repair option for these feeders on the market and provides significant cost savings in comparison to purchasing replacement feeders. 
2nd September 2016

Versatile feeder repair set

Versatile feeder repair set
Count On Tools (COT) just introduced the MYDATA Agilis feeder repair set which allows customers to convert any Agilis feeder to any of the four sizes to reduce overall feeder count and maximize production capabilities.
10th May 2016


Count On Tools adds precision rails for its StripFeeders

Count On Tools adds precision rails for its StripFeeders
Count On Tools, Inc has released Precision Rails for its StripFeeder products. These enable customers to take full advantage of the StripFeeder platform when running micro-components such as 0201s, 01005s and 03015s in 4 mm or 8 mm tape (paper or emboss).
9th March 2016

Metal Nozzle Magazines Save Money

Metal Nozzle Magazines Save Money
Count On Tools just announced the ASM Siplace Metal Nozzle Magazines for 7xx/9xx Series machines. According to the company, this self-designed replacement nozzle magazine for Siplace collect-and-place machines will provide higher durability combined with significant cost savings and reduced waste.
2nd March 2016

Official launch for QWIKTRAY Program at APEX

Count On Tools (COT) will exhibit at the 2016 IPC APEX EXPO. According to the company, the event will also mark the official launch of the QWIKTRAY program for the US market. The new QWIKTRAY system has been developed to provide low-cost, custom matrix trays for many types of electronic components.
16th February 2016

Feeder repair kits are the economical solution

Count On Tools Inc has announced plans to expand its repair program for MYDATA Agilis Feeders by offering Feeder Repair Kits. Each MYDATA feeder repair kit includes a precision machined aluminum side cover plate with cover tape plow pre-installed, a new spring, and matching screws for reassembly.
4th February 2016

Quiktray banishes hand placement

Count On Tools, Inc.will display its new QWIKTRAY system at productronica. The QWIKTRAY platform allows surface mount components to be picked up in a repeatable method when tape-and-reel is not available and standard JEDEC trays do not exists. As a result, customers no longer have to place these components by hand.
21st October 2015

Custom Matrix Tray System

Count On Tools, Inc. (COT) has  announced the launch of its new QWIKTRAY system, developed to provide low-cost, custom matrix trays for many types of electronic components. QWIKTRAY allows surface mount components to be picked up in a repeatable method when tape-and-reel is not available and standard JEDEC trays do not exist. Users do not need to place these components by hand.
9th October 2015

Nozzles target NPM equipment

Nozzles target NPM equipment
A complete line of nozzles for the Panasonic NPM machines are now available from Count On Tools. These nozzle designs enable highly accurate, repeatable, optimised chip placement. The NPM series equipment optimises the latest technologies into a lean modular solution for changing, expanding and evolving electronic assembly needs.
18th February 2015

Programme offers instant access to products without overstock risk

Count On Tools (COT) is launching a programme designed to give EMS companies and contract manufacturers on-demand access to high-quality SMT nozzles, tooling and consumables for more than 20 of the top pick-and-place equipment vendors. The INSTOCK Consignment Program has been developed to allow immediate access to project-critical products with no up-front inventory costs or risk of overstock.
29th January 2015

Adjustable strip feeder suits low-volume, high-mix

Adjustable strip feeder suits low-volume, high-mix
Count On Tools has announced that it will exhibit in Booth 3625 at the IPC APEX EXPO, scheduled for 24th to 26th February 2015 at the San Diego Convention Center in California. COT will debut its StripFeeder Mini, which condenses the design of its existing StripFeeder into a smaller package, 134x152mm, and is better equipped to handle shorter strips of components, such as 2-4" of tape.
22nd January 2015

Nozzles designed for i-PULSE series surface mounters

Nozzles designed for i-PULSE series surface mounters
Nozzles and tooling for i-PULSE series surface mounters from Yamaha Motor Company’s SMT division are now being offered by Count On Tools. Standard nozzles for the M-series machines, along with custom engineered nozzles for odd-form components, are among the company's offerings.
25th September 2014

Nozzle enables accurate & repeatable chip placement

Nozzle enables accurate & repeatable chip placement
Based on a proven design used in SMT equipment for over a decade, Count On Tools has introduced the Quad 01005 Ceramic Nozzle. The micro-component nozzle for Quad machines measures 0.32mm OD with a 1.00mm ID. It enables highly accurate, repeatable chip placement for 0201/01005 micro-components.
23rd September 2014

Count On Tools offers discontinued 702/902 nozzles

Count On Tools offers discontinued 702/902 nozzles
Phased out in January 2013, the discontinued 702/902 nozzle for ASM Siplace equipment is being offered by Count On Tools. Due to higher customer demand, COT continued production of the nozzles in anticipation of customers still seeking to use the 702/902 nozzle geometry for 0201 (0.6x0.3mm) and 0402 (1.0x0.5mm) components in their pick-and-place equipment.
23rd April 2014

Count On Tools scoops third award for StripFeeder System

Count On Tools scoops third award for StripFeeder System
At the 2014 NPI Awards, Count On Tools scooped an award for their StripFeeder Modular System version 2. Awarded in the category of Automation Tools, the win marks the company’s third award for the StripFeeder Series in the last year.
26th March 2014

Support plates provide enhanced support for heavy loads

Support plates provide enhanced support for heavy loads
Additional support plates, enabling users to limit the movement of the ESD-safe foam fingers while shortening the compression height, has been announced by Count On Tools for their line of ezLOAD Board Supports. The ezLOAD Support Plates are available in 1/4" (0.25) and 3/8" (0.375) heights.
25th March 2014

Count On Tools reveal special offers for APEX

Count On Tools reveal special offers for APEX
  Count On Tools has announced two limited time special offers for the IPC APEX EXPO. All STRIPFEEDER .mod V2 kits are 20% off and all ezLOAD modules are buy two, get one free. Valid through to April 30th, 2014, this offer is effective immediately, simply mention coupon code APEX14.
5th March 2014

Updated StripFeeder Modular System exhibited

Updated StripFeeder Modular System exhibited
At the IPC APEX Expo, March 25-27, 2014 in Las Vegas, Nevada, Count On Tools will exhibit version 2 of the StripFeeder Modular System in Booth 725. The award-winning StripFeeder is particularly suitable for loading tape-and-reel components onto compact modules for prototyping and high-mix low-volume applications.
18th February 2014

Count On Tools Debuts New Accessories for StripFeeder Modular System

Count On Tools introduces additional accessories for its revolutionary StripFeeder System for loading tape-and-reel components onto compact modules for prototype and high-mix/low-volume applications. The StripFeeder .mod (Modular) System features removable rails that can be mounted to accommodate a wide array of tape sizes in the same feeder.
4th December 2012


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Hotspots Specials 2019
24th October 2019
Germany Böblingen, Germany
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona
Maintec 2019
30th October 2019
United Kingdom NEC, Birmingham
NOAH Conference 2019
30th October 2019
United Kingdom Old Billingsgate, London
productronica 2019
12th November 2019
Germany Messe München