Companies

Ellsworth Adhesives Ltd

Ellsworth Adhesives Ltd Articles

Displaying 1 - 20 of 33
Component Management
29th May 2020
Ellsworth Adhesives expand business with Irish division

Ellsworth Adhesives Europe has announced the launch of a new Irish division. Across Europe, Ellsworth Adhesives has increased its footprint by opening branches in the UK, Spain, France, Scandinavia, Poland, and Germany.

Component Management
7th October 2019
New epoxy foam for void-filling applications

Robnor ResinLab, formulator of epoxy and polyurethane resin systems, has announced the launch of a brand-new development material, PX19-GE3259-03. This epoxy foam offers good adhesion to a wide variety of substrates. The two-component epoxy system is particularly suitable for void-filling applications and has good compressive strength for backfilling of parts. 

Component Management
2nd August 2019
Microcare general purpose cleaner joins portfolio

The versatile new Microcare General Purpose Cleaner and Adhesive Remover is now available to order from Ellsworth Adhesives Europe. The multi-purpose cleaning system replaces the discontinued Slow Drying Flux remover (MCC-E7M) due to high demand.

Component Management
14th May 2019
Primerless silicone encapsulant now available

It has been announced that Ellsworth Adhesives are now taking orders for the newly-launched Dowsil (Dow) EI-2888 Primerless Silicone Encapsulant. Dowsil EI-2888 is an optically clear encapsulant designed for professional LED lighting applications. The 100% silicone encapsulant provides LEDs with essential protection from moisture and surface contaminants. 

Analysis
4th February 2019
Diversified portfolio with new range of tooling products

The introduction of a brand-new line of tooling products has been announced by Ellsworth Adhesives Europe, adding to its portfolio. The new range has been designed for use in the composites and foundry industries and comprises of over a hundred products including polyurethane and epoxy boards for styling, model making and tooling, as well as specialist resin systems, close contour materials and reaction injection moulding. 

Events News
12th November 2018
Exhibitors at Spanish trade fair Matelec

Distributor of adhesives, specialty chemicals and adhesive dispensing equipment, Ellsworth Adhesives Europe, has confirmed its attendance at Matelec 2018 trade fair in Madrid, Spain. Taking place in the Feria de Madrid Conference Centre from November 13th-16th, Matelec is a key southern Europe event for the electrical, electronic and telecommunications industries.

Component Management
21st August 2017
QiC adhesive added to product portfolio

Ellsworth Adhesives has announced the addition of  Dow Corning's EA-5151 adhesive to its product portfolio. This so called ‘Quick in Connect’ (QiC) adhesive has been formulated to accelerate electronic assembly and increase production throughput. Available as a one-part silicone formulation, Dow Corning EA-5151 is applied as a warmed liquid with a plunger-equipped gun or a robotic dispenser.

Component Management
20th July 2017
Medical adhesive available now from Ellsworth

Ellsworth Adhesives Europe has announced the addition of the new Dymax 1406-M adhesive to its product range. This medical device material has been designed especially for small needle bonding. As a next generation needle bonding adhesive, 1406-M is ideal for manufacturers looking to switch to LED curing in small gauge needle applications.

Component Management
3rd April 2017
Ellsworth extends equipment range with the addition of Planetary Mixer

Ellsworth Adhesives has revealed the latest addition to its equipment range – the SK-350T2 Centrifugal Planetary Mixer with mixing and degassing system. Manufactured in Japan by the Shashin Kagaku Product Company, the SK-350T2 is a Kakuhunter brand product with CE approval. This newly developed centrifugal planetary mixer can degas a wide range of single component materials or simultaneously mix and degas multi component materials, reg...

Component Management
7th March 2017
Positive displacement PC pump

The TS8100 Series Positive Displacement PC Pump from Ellsworth Adhesives Europe has been designed with the ability to dispense a diverse range of fluids including low viscosity coatings to high viscosity greases. It is based on progressive cavity (PC) technology, with a special stator and rotor design to create an accurate and consistent dispensing output. 

Cables/Connecting
7th February 2017
Peelable maskant provides protection for PWB connectors

Distributor of industrial adhesives and adhesive applicators, Ellsworth Adhesives Europe has expanded its product range with the addition of the Dymax SpeedMask 9-7001. This peelable maskant for PWB connectors and board level is designed to create protection for connectors and board surfaces during solvent based or light-curable conformal coating applications in PWB assembly.

Component Management
16th January 2017
Ellsworth acquires TRB’s adhesive business unit

Ellsworth Adhesives Europe has today confirmed its purchase of TRB Lightweight Structure’s Lord adhesive business. As a result,  Ellsworth Adhesives becomes one of the largest distributors of Lord Corporation Materials across Europe, with distribution rights for both Lord Structural Adhesives and Lord Electronic Materials product ranges.   

Optoelectronics
20th September 2016
Spot-Curing system leaves traditional behind

  Announcing the addition of the new BlueWave MX-150LED Spot-Curing system is Ellsworth Adhesives Europe, from Dymax to its product range. With unique curing flexibility this system offers a higher consistency than traditional spot-curing systems.

Events News
24th August 2016
Adhesives range returns to successful Madrid show

A broad range of products will be showcased by Ellsworth Adhesives Europe at Matelec 2016 International Trade Fair for the Electrical and Electronics Industry in Madrid (October 25-28). As a distributor of adhesives and adhesive dispensing equipment, the Ellsworth Adhesives stand will feature a range of adhesive materials along with several key dispensing products that will be demonstrated in action.

Component Management
18th July 2016
Ellsworth Adhesives to exhibit at E-16 in Denmark

Ellsworth Adhesives Europe has told us it plans to go to Elektronikmesse (E-16) - Denmark’s biggest trade show for the Electronics industry - which is taking place in the Odense Congress Centre, from September 6th – 8th.

Component Management
12th April 2016
Solder paste boosts temperature stability

The new temperature stable water wash solder paste from Henkel Loctite’s Game Changer Series, the GC 3W is on sale at Ellsworth Adhesives. The Game Changer Series from Henkel was launched just a year ago, when Loctite GC 10 entered the market and became the first material of its kind to boost temperature stability.

Component Management
5th January 2016
Ellsworth Glues On AS9120 Certification

Ellsworth Adhesives Europe has announced that it has been awarded AS9120 accreditation, a standard written by the aerospace industry to improve quality and ensure the integrity of supplies to its industry. 

Component Management
4th November 2015
Reflective coating brightens LED output

Ellsworth Adhesives Europe is taking orders for Dow Corning CI-2001, a white reflective coating from the manufacturer’s Lighting Solutions range. Dow Corning CI-2001 is a new product on the European market and has been designed especially for the LED Manufacturing sector. CI-2001 differs from standard conformal coatings in that it is highly reflective.

Component Management
14th October 2015
Table top mixer processes wide range of materials

The SK-300S table top mixer is the latest addition to the Ellsworth Adhesives Europe portfolio of dispensing equipment. Manufactured in Japan by Shashin Kagaku Product Company, the SK-300S is a ‘Kakuhunter’ brand product with CE approval. The new mixing and degassing machine is exclusive to Ellsworth Adhesives and offers consumers a cost effective mixing solution for two component materials.

Component Management
29th July 2015
Highly viscous silicone-free paste prevents slumping

The newly launched TCP091 silicone-free paste from Robnor Resins is now available from Ellsworth Adhesives Europe. The paste has been specially formulated to provide efficient and reliable heat transfer across the interface between electronic components. Developed to optimise performance, the paste is highly viscous, a property that helps prevent slumping.

First Previous Page 1 of 2 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier