Metcal

Address:
12151 Monarch St
Garden Grove
CA 92841
United States of America

Phone: 714-799-9910

Web: www.metcal.com


Metcal articles

Displaying 1 - 20 of 32

Reduce risk and increase productivity with robotic soldering

Reduce risk and increase productivity with robotic soldering
The global launch of the Robotic Soldering System has been announced by Metcal, with patented Connection Validation (CV) technology and a touchscreen graphical user interface to drastically mitigate the risk of solder joint defects and add productivity to the manufacturers’ soldering process.
31st January 2019

Hand soldering to be showcased at the SMTA Upper Midwest Expo

Hand soldering to be showcased at the SMTA Upper Midwest Expo
Metcal today announced plans to exhibit at the SMTA Upper Midwest Expo & Tech Forum, scheduled to take place Thursday, 14th June, 2018 at the DoubleTree by Hilton Minneapolis - Park Place in Minneapolis, MN. The company will demonstrate its Connection Validation (CV) Soldering System with new hand-pieces, Digital Hot Air Pencil and Solder Tip Cleaner.
22nd May 2018

Benchtop soldering systems to be showcased at NEPCON China

Benchtop soldering systems to be showcased at NEPCON China
Metcal has announced plans to exhibit in Stand 1F38 at NEPCON China, scheduled to take place 24th to 26th April, 2018 at the Shanghai World EXPO Exhibition & Convention Center. The company will show its Connection Validation (CV) Soldering System with new hand-pieces, Digital Hot Air Pencil, High Thermal Demand solution and Solder Tip Cleaner.
23rd March 2018


Metcal gets China Vision Award

Metcal gets China Vision Award
Metcal has received a 2017 SMT China Vision Award in the category of Hand Soldering for the CV-5200 Connection Validation Soldering Station. The award was presented to the company on April 25, 2017 at the Shanghai World Expo Exhibition & Convention Center during NEPCON China. This is the second award that the company has received for Connection Validation since its introduction in early 2017.
27th April 2017

Next big step in process control: connection validation

Next big step in process control: connection validation
  Metcal’s CV-5200 Connection Validation Soldering Station provides real-time closed loop feedback on intermetallic compound formation. Plus, a communication port enables process traceability and firmware upgrades. Metcal announced the introduction of its CV-5200 Connection Validation Soldering Station.
14th February 2017

Solder wire feeding at SMTAI

Metcal is to exhibit at SMTA International and will show its USF-1000 Solder Wire Feeder along with the Scarab Site Cleaning System, Scorpion Rework System, MX-5200 Soldering System and more. The Metcal USF-1000 Solder Wire Feeder is said to add a new level of control and convenience to the soldering process.
2nd September 2016

Ortiz joins Metcal to run Southwest

Ortiz joins Metcal to run Southwest
Metcal just announced the appointment of  a new Regional Sales Manager for Arizona, New Mexico, Texas, Oklahoma, Louisiana, and Mexico and South America. Gabriel Ortiz brings more than 20 years of experience in the electronics manufacturing industry leading teams in both the manufacturing and distribution environments to develop his business. He is a seasoned professional with a proven track record in developing and motivating teams to grow sales in the most demanding of markets.
23rd August 2016

Metcal partners SmartTec at SMT Nuremberg

Metcal has announced that it will exhibit with distributor SmartTec at the upcoming SMT/Hybrid/Packaging show. Metcal’s Scarab Site Cleaning System (APR-2000-SCS) will be on display, along with the Scorpion Rework System, the MX-5200 Soldering & Rework System, and the soon-to-be-launched Solder Wire Feeder.
12th April 2016

Metcal to launch solder wire feed system at APEX

Metcal to launch solder wire feed system at APEX
Metcal plans to exhibit at the 2016 IPC APEX EXPO and will show the Metcal USF-1000 Solder Wire Feed System for the first time, along with Metcal’s proven rework and repair equipment, including the Scarab Site Cleaning System, Scorpion Rework System, MX-5200 Soldering System and more.
17th February 2016

Metcal at the cutting edge

Metcal at the cutting edge
Metcal has just announced it will hold the first workshop of the 2016 Cutting Edge Rework Tour on Thursday, March 3, 2016 in Melbourne, FL. The workshop will address the latest techniques for contactless site cleaning and rework as well as repair of a variety of applications.
1st February 2016

Metcal to exhibit at SMTA Rocky Mountain Expo

Metcal to exhibit at SMTA Rocky Mountain Expo
Metcal will exhibit at the SMTA Rocky Mountain Expo & Tech Forum on Tuesday, Jan 26 in Denver, CO. The company’s MX-5200 Soldering & Rework System will be on display, along with the MX-HPDC Dual Cartridge Hand-Piece and HCT2-120 Hot Air Pencil.
6th January 2016

Last two rework workshop dates announced by Metcal

Metcal has announced the dates for the final two workshops of the Cutting Edge Rework Tour. The workshops will address the latest techniques for contactless site cleaning and rework as well as repair of a variety of applications. They will take place in Boxborough, MA and Jessup, MD.
4th November 2015

Metcal to show wide range of products in Munich

Metcal plans to exhibit a range of products including the Scarab, Scorpion, MX-5200 and HCT2-120 at productronica in Munich. The Scarab ensures accurate and repeatable cleaning of the component pad in one user-friendly system and addresses the technical demands presented by component manufacturers today. Additionally, the Scarab addresses the industry needs with an automated system capable of cleaning components pads without contact.
25th October 2015

Metcal to show key systems at SMTA Guadalajara

Metcal will exhibit many key products at SMTA Expo in Guadalajara, Mexico from October 14 to 15, 2015. Visitors will get the chance to see and discuss the company's Scorpion placement system as well as the MX-5200, HCT-900 and PCT-100.
5th October 2015

Metcal to display the scarab site cleaning system at SMTAI

Metcal to display the scarab site cleaning system at SMTAI
Metcal has announced plans to exhibit in Booth 816 at SMTA International, scheduled to take place 29th - 30th September, 2015 at the Donald Stephens Convention Centre in Illinois, USA. The Metcal Scarab Site Cleaning System (APR-2000-SCS) will be on display, along with the MX-5200 Soldering & Rework System and HCT2-120 Hot Air Pencil.
17th September 2015

Metcal's Paul Wood presents at the BEST Tech Symposium

Metcal has announced that Paul Wood is speaking at the BEST Tech Symposium on Small Package Challenges, scheduled to take place 1st October, 2015 at Pinstripes, South Barrington in South Barrington, Illinois, USA. Mr. Wood will present Hand Soldering Techniques for Small Packages.
14th September 2015

Metcal resumes its 2015 cutting edge rework tour

Metcal resumes its 2015 cutting edge rework tour
  Metcal has announced that its series of cutting-edge rework and repair workshops will resume in September 2015. The workshops will address the latest techniques for contactless site cleaning and rework as well as repair of a variety of applications.
9th September 2015

Metcal to display site cleaning system at NEPCON

Metcal has announced plans to exhibit in Booth B-1G26 at NEPCON South China, scheduled to take place 25th to 27th August, 2015 at the Shenzhen Convention & Exhibition Center. The Metcal Scarab site cleaning system, APR-2000-SCS, will be on display, along with the Solder Ball Replacement Kit and MX-HPDC dual cartridge hand-piece.
27th July 2015

Metcal to participate in ACI's Tech Expo

Announcing its participation in ACI Technologies’ second annual Tech Expo, Metcal will present the Rework and Repair session, scheduled to take place 20th and 21st May, 2015 at its facility in Philadelphia, PA. Ed Zamborsky, Metcal’s RSM, will present the session.
15th May 2015

Accurate & repeatable cleaning in user-friendly system

Metcal has announced plans to exhibit with SmarTec at SMT Hybrid Packaging, scheduled to take place from 5th to 7th May 2015 in Nuremberg Germany. The latest Metcal Scarab Site Cleaning System (APR-2000-SCS) will be showcased at the SmartTec stand (stand 321, hall 7), along with the Solder Ball Replacement Kit and MX-HPDC dual cartridge hand-piece.
13th April 2015


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Girls in Tech | Catalyst | 2019
4th September 2019
United Kingdom The Brewery, London
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
EMO Hannover 2019
16th September 2019
Germany Hannover
Women in Tech Festival 2019
17th September 2019
United Kingdom The Brewery, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris