The LMG3100 device is a 90V, 97A Gallium Nitride (GaN) with integrated driver. The device consists of a 100V GaN FET driven by a high-frequency GaN FET driver. The LMG3100 incorporates a high side level shifter and bootstrap circuit, so that two LMG3100 devices can be used to form a half bridge without needing an additional level shifter.

Consumers want portable, fast and efficient chargers for the various electronic devices they carry with them daily. With a majority of electronics moving to USB Type-C chargers, demand for compact power adapters that can charge all of their devices is increasing rapidly.

Here, you’ll find a selection of the latest news, products, and articles from Texas Instruments focused on power.

Here, you’ll find a selection of the latest news, products, and articles from Texas Instruments focused on Control Drive.

Here, you’ll find a selection of the latest news, products, and articles from Texas Instruments focused on the Automotive ADAS industry.

Here, you’ll find a selection of the latest news, products, and articles from Texas Instruments focused on the Automotive industry.

PSpice for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence. Available at no cost, PSpice for TI includes one of the largest model libraries in the industry, spanning our analog and power portfolio, as well as select analog behavioral models.

The LMG2100R044 device is a 90V continuous, 100V pulsed, 35A half-bridge power stage, with integrated gate-driver and enhancement-mode Gallium Nitride (GaN) FETs.

The AWR2544LOPEVM is an easy-to-use evaluation board for the AWR254x mmWave sensing device, with direct connectivity to the DCA1000EVM.

Here, you’ll find a selection of the latest news, products, and articles from Texas Instruments focused on Robotics.

Here, you’ll find a selection of the latest news, products, and articles from Texas Instruments focused on High Voltage.

The main purpose of this application report is to demonstrate a systematic approach to design high performance gate drive circuits for high speed switching applications.

From surgical procedures to lifting thousands of kilos in manufacturing plants, robots simplify many aspects of our lives. And while the impact that robots have in our modern world may be obvious, have you ever wondered how robotic systems achieve such impressively precise, fast, and powerful motions?

The TPSI2140-Q1 is an isolated solid state relay designed for high voltage automotive and industrial applications. The TPSI2140-Q1 uses TI’s high reliability capacitive isolation technology in combination with internal back-to-back MOSFETs to form a completely integrated solution requiring no secondary side power supply.

This reference design realizes a reinforced isolated 3-phase inverter sub-system using isolated IGBT gate drivers and isolated current/voltage sensors.

The TCA9539-Q1 is a 24-pin device that provides 16 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus protocol). 

The TCAN1044AEV-Q1 is a high-speed controller area network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.

This reference design implements a cost-optimized high EMC immunity EtherCAT slave (dual ports) with SPI-interface to the application processor.

Texas Instruments (TI) has posted first quarter revenue of $3.66 billion down 16% year on year and 10% sequentially, but ahead of the consensus of $3.61 billion.

The SimpleLink 2.4 GHz CC2662R-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targeting wireless automotive applications. The device is optimized for low-power wireless communication in applications such as battery management systems (BMS) and cable replacement.