Component Placement

Displaying 1 - 10 of 113

Automated solutions for all forms of thermal interface materials

Automated solutions for all forms of thermal interface materials
  Automation solutions for all forms of Thermal Interface Materials (TIMS) are offered by Laird Performance Materials (LPM). The company offers dispensable gap fillers, printed thin gap TIMs (TIM Print), ‘robotic motion control’ placed thick –gap TIMs (TIM Pick). 
9th May 2019

Automated solution to apply traditionally difficult materials

Automated solution to apply traditionally difficult materials
TIM Print is a novel method to apply Laird Performance Materials’ thermal management die cut pads while reducing total cost of ownership. It offers a more robust, reproducible and reliable application process as compared to traditional ‘peel and stick’ and dispensing methods.
9th May 2019

Cost effective automated thermal pad application for die cut TIMs

Cost effective automated thermal pad application for die cut TIMs
A new method has been introduced to apply Laird Performance Materials’ thermal management die cut pads while reducing total cost of ownership, with the TIM Pick. It offers a more robust, reproducible and reliable application process as compared to traditional ‘peel and stick’. TIM Pick uses robotic motion control with an innovative ‘pick head’. 
9th May 2019


Moisture control specialist at productronica

Super Dry Totech’s latest generation of robotically automated component storage systems will be available to see at productronica. The Totech Dry Tower incorporates complete moisture management, floor life reset and traceability of MSL components, in addition to optimising the storage demands of different sized reels and trays, operator-free. 
8th September 2017

Precision positioner for microassembly applications

Precision positioner for microassembly applications
Precision motion and positioning company, PI (Physik Instrumente), has introduced the L-402. The company now has a miniature linear stage in its range with a narrow size of only 22.5mm that makes it possible to easily integrate into even the most confined installation space. On top of that, the inexpensive precision stage can also move heavy loads up to 1kg smoothly and with a repeatability of up to 0.5μm. The maximum travel range is 13mm, the highest velocity is 5mm/s.
17th August 2017

Surface mounter offers 200,000cph placement capability

Surface mounter offers 200,000cph placement capability
Yamaha Motor IM Europe is to showcase the YSM40R Ultra-High-Speed Modular surface mounter as part of its full line solution at SMT Hybrid Packaging 2017 in Nuremberg May 16-18, booth 321, Hall 4. The YSM40R’s 200,000cph placement capability and area-efficient 1m-wide outline frees OEMs and contract assemblers to increase capacity and maximize use of available space.
24th April 2017

Self-assembly technique could lead to smaller microchip patterns

Self-assembly technique could lead to smaller microchip patterns
For the last few decades, microchip manufacturers have been on a quest to find ways to make the patterns of wires and components in their microchips ever smaller, in order to fit more of them onto a single chip and thus continue the relentless progress toward faster and more powerful computers. That progress has become more difficult recently, as manufacturing processes bump up against fundamental limits involving, for example, the wavelengths of the light used to create the patterns.
27th March 2017

Compact high-speed surface mounter

Yamaha’s YSM10 surface mounter is said to be the fastest in its class at 46,000CPH. The YSM10 is developed based on what Yamaha call the three "Ones" concept and provides 1) a combination of a mounting speed that is number one in its class, 2) a one-head-solution that does not require replacement, and 3) an integration of three models of the YS12 type into one platform.
23rd February 2017

Chain brings benefits to food and beverage industry

Chain brings benefits to food and beverage industry
  A special chain has been developed by Tsubaki, for the tray packing machinery widely used in the food and beverage industry. It is internally lubricated so that it is clean in use and does not need regular re-lubrication.
22nd February 2017

Four opt for new pick and place handler

Four opt for new pick and place handler
Multitest says it has received multiple orders for the MT2168 XT  tri-temp pick and place handler.  No less than four global IDMs have chosen the MT2168 XT for their volume production.
15th January 2017


Component Placement documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi