Essemtec to Highlight New 3-D Dispense and Placement System
Essemtec has developed this fully automatic 3-D dispensing and SMD placement machine Hydra in a close collaboration with a producer of 3D-MID products. The system operation of Hydra is similar to a standard SMD pick-and-place machine. Therefore, it can be integrated easily into a typical electronics production.
Essemtec combines a standard 2-D SMD pick-and-place of the Paraquda series with a 6-axes robot. The robot positions the substrate holder so that the placement level is always horizontal. Because of this concept, the 3-D assembly machine Hydra is able to use the same component feeders as a normal SMD placement machine, the same spare parts, the same vision system and even the same pickup tools. The Paraquda’s software and control system is simply expanded by a robot controller.
The Hydra can dispense glue in nearly any position and assemble SMD components accurately. The 4-axes pick-and-place head can place up to 2,500cph in 3-D mode and up to 7,000cph in 2-D mode.
The placement area is specified at 300x160 mm. The placement axes features a vertical travel range of 50 mm and, therefore, can place components into deep cavities. The component range spans from 01005 up to 20x20mm with a maximum height of 18mm. The machine features an inline conveyor system and quick changeover, making it capable of series production as well as small series and sample.
Product Spotlight
APV1111GVY
Panasonic
Panasonic PhotoMOS® Photovoltaic MOSFET High-Power Drivers
| SKU: | |
|---|---|
| Stock: | 3490 |
| Cost: | $3.95 |
