Test & Measurement

Module measures and tests analogue voltages on 128 channels.

1st June 2018
Mick Elliott
0

The SFX/VPC-AMC128 (Analog Measurement Card) is a new test extension module. It can be used to measure and test analogue voltages on 128 channels. The module can be easily integrated into the in-line test system RAPIDO from GOEPEL electronic, as well as into customer-specific test systems.

The analogue measurement card is based on eight separate AD converters. Each can convert two channels, enabling up to 16 channels to be converted simultaneously, which means that up to 16 DUTs can be tested simultaneously in a parallel test.

Each channel can be configured and started independent of its measuring range. This makes it easy to test and measure a wide range of voltages in three different measuring ranges.

Thus, both low-voltage applications and automotive applications with higher voltages (for example, 48V) can be fully supported. Each channel has an input resistance of > 1 MOhm to avoid loading the hardware to be tested and effecting accuracy of the measured values.

The SFX/VPC-AMC128 is controlled by a standard Gigabit Ethernet interface, which allows easy integration into other test systems.

Depending on the application, the module can be configured using the Embedded JTAG Solutions Software SYSTEM CASCON; when used in other test systems, configuration via a web interface using any browser is possible, providing, for example, remote access and targeted assistance in troubleshooting worldwide.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier