Nanoparticles improve melting and solidification

Posted By : Enaie Azambuja
Nanoparticles improve melting and solidification

In an advance that could lead to improved manufacturing, a study by UCLA researchers shows that adding nanoparticles to metals during the melting process allows for better control during melting. The melting and solidification of metals are important processes in manufacturing, used in welding and also 3D printing. For example, laser welding has been used to build cars and ships for decades.

However, the researchers suggest that improvements in melting/solidification processes could have financial benefits resulting from increased efficiency and reliability. There are two important "zones" in a metal during melting.

The first is the "melting zone," where the metal turns into a liquid, which allows it to be spread and shaped as desired. The second is the "heat-affected zone." In this adjacent zone, the metal is not molten, but its microstructure could deteriorate from the heat.

The larger a melting zone is, the larger the nearby heat-affected zone is. However, for manufacturing, the opposite effect is actually desired. A deep and maximised melting zone coupled with a corresponding minimal heat-affected zone would allow for a high-quality melted region, while lowering susceptibility to potential defects in the adjacent area.

The team, led by Xiaochun Li, professor of mechanical and aerospace engineering at the UCLA Henry Samueli School of Engineering and Applied Science, showed that by adding nanoscale particles of aluminum oxide during a later melting of nickel, they could increase the depth of the metal's melting zone by 68%, while decreasing the heat-affected zone by 67%.

Adding nanoparticles of silicon carbide showed similar results. The research was published today in Nature Communications. "Our discovery of the unusual melting and solidification of materials containing nanoparticles will not only have immediate impacts on existing melting and solidification manufacturing processes, but also on other applications, such as pharmaceutical processing and energy storage," said Li who holds the Raytheon Chair in Manufacturing Engineering.

The added nanoparticles reduce heat dissipation during the melting process, Li said, making a melted zone that is deeper, while the heat-affected zone is shallower. There are two physical mechanisms that make their nanoparticle-assisted process work, Li said. First, the nanoparticles reduce the thermal conductivity, therefore decreasing conductive heat transfer to the rest of the material—essentially, they trap more heat in.

Second, the nanoparticles increase viscosity in the melted zone, which suppresses what's known as thermocapillary flow. This also slows the heat transfer from within the melted zone.

Li added that the control of microstructures by nanoparticles will impact various existing processing technologies, such as welding and 3D printing, where the deterioration of the microstructures and material properties of heat affected zone is a serious problem that limits the performance of the components.

"For example, this could be used to improve the fabrication of lightweight, high-performance parts, such as airplane wings and wind turbine blades, or making precision components like mechanical gears," Li said.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

LOPEC 2019
19th March 2019
Germany Messe Munchen