Reinforced nylon mesh prevents die-cut hole collapse
Fujipoly’s Sarcon 250G-HF2d thermal interface material is manufactured with a reinforced nylon mesh inner layer and a low-tac surface treatment. This prevent die-cut holes from collapsing and help maintain original specification tolerances during final assembly. These material enhancements also reduce tearing, elongation and damage making your production operations faster and easier.
The 2.5mm thick material improves cooling performance by filling unwanted air gaps between board components and processors thereby increasing surface contact with a heatsink.
Sarcon 250G-HF2d transfers heat with a thermal conductivity of 1.5W/m°K according to ASTM D2326 and a thermal resistance of 2.61°Cin2/W at 14.5PSI (16.81°Ccm2/W at 100Kpa). This flame retardant TIM is available in precut sheets up to 300x200mm and can be die-cut or trimmed to fit your components. Depending on gap size, additional material thicknesses are available ranging from 0.5 to 5.0mm.
Product Spotlight
APV1111GVY
Panasonic
Panasonic PhotoMOS® Photovoltaic MOSFET High-Power Drivers
| SKU: | |
|---|---|
| Stock: | 3490 |
| Cost: | $3.95 |
